DMD-T865
8″ Android tablet and holder – Made for motorcycle navigation!
8″ Android tablet and holder – Made for motorcycle navigation!
8″ Android tablet and holder. Built for motorcycle navigation!
Built for Navigation:
For those who seek a navigation device with the advantages of the Android eco-system!
–
Includes tablet, charging holder and harness.
IP67, vibration and shock proof, waterproof, with all the motorcycle navigation feature you would want.
–
Highlights:
The DMD-T865 harness includes 3 connectors that allow you to connect it to the holder, device back connector and controller, everything is plug and play! You can choose to use only the screw type back connector, you can use only the holder connection, or you can use both at same time! Everything will stay powered and connected.
Both power and handlebar controller cable are routed to both the holder and back panel connector, so you can use any of the two solutions.
The DMD-T865 does not use any external power supply, you simply connect the harness to your motorcycle 12V and it will directly feed the tablet and optional handlebar controller.
IP67 Rating – Water resistant (submersible up to 3m) and dust proof
Hot and Cold Tested: IEC 60068-2-14:2009
-20C to 60C certified
Proper charging system, if battery temperature gets high, the battery will be put into idle mode, keeping its level while the system will run directly from power. No power loss, no discharging, no shutdown!
Shock and Crash Tested: IEC 60068-2-27:2008
Pulse waveform: half sine wave; Acceleration: 500m/s2; Pulse time: 6ms;
Test axis: ±X axis, ±Y axis, ±Z axis, a total of 6 directions;
Vibration Tested: IEC 60068-2-64:2008
12V from motorcycle to feed tablet and controller
Delivers Power to Controller
Sends data from controller to tablet
Single controller connector
Delivers Power and Controller Data to Tablet
Delivers Power and Controller Data to Tablet
Waterproof Screw Type M12
Holder with pins
Pins for holder with pins option
Expansion module for future accessories
Connector for External GPS Antenna (optional)
Cover for card slots – 2 x SIM + 1 x SD Card
New Holder with Side and Rear Lock:
Our holders now include both side lock and rear lock.
To make it more versatile for all our costumers needs, we added both side and rear key lock, this way you can use the one that is more accessible for your setup.
We have also almost doubled the thickness of the holder metal to make it even more resistant.
Holders always include full harness:
When you buy the DMD-T865, in the package there is always one holder and a full harness.
When you buy an extra holder it also always include holder and full harness (including the M12 cable).
Our Android system is optimised for navigation and includes many useful system functionality tailored for motorcycle navigation.
We are always working to improve the system and all its apps. We release frequent OTA updates with firmware updates and configuration updates.
The SOS system will detect falls and trigger a user configurable SMS, with your location, that can be sent to up to two phone numbers. Can be used as an Alarm system too.
Configure actions for when you turn off your motorcycle ignition, have DMD-T865 shutdown or turn-off the screen and make it work only when its in the holder.
Configure the three device buttons with useful actions like SOS, toggle screen touch and open apps. Setup actions for when the device is inserted in the holder.
With only 528g, the DMD-T865 is a device that will not only power your next adventure but you will also want to use at home or at work.
With a battery that lasts approximately 8h at full screen brightness, this is a device that you can take with you for your everyday use!