Tour manager in DMD2

[far-rider]

Hello everyone,

I use DMD2 on the T665 phone for various use cases.
I mainly do weekend or holiday tours lasting several days.
For many years I have prepared such tours on the PC and transferred them as a .gpx file to navigation devices before the trip.
Unfortunately, this method is not flexible enough.
Even a solution with a DMD website does not seem to be practical for on the go with this phone.
What I miss most is the option of configuring different presets for tour sections, such as highway or gravel, in the same tour.

I therefore suggest a flexible tour manager in DMD2.
In the following I will construct the basic principle and some application examples.

> Tour manager

>> Tour 1
>>> General Folder
– Poi’s
– waypoints
– shapingpoints
– tracks
– routes

>>> Day 1 #dateconfig
>>>> Section 1 – Section preset: Roadfun, Ferry, Motorway, ..
link to general folder: – Poi’s, – waypoints, – shapingpoints, – tracks, – routes
>>>> Section x – Section preset: Roadfun, Ferry, Motorway, ..
from general folder: – Poi’s , – waypoints, – shapingpoints, – tracks, – routes

>>> Day x #dateconfig >>>> Section 1 – Section preset: Roadfun, Ferry, Motorway, ..
link to general folder: – Poi’s, – waypoints, – shapingpoints, – tracks, – routes
>>>> Section x – Section preset: Roadfun, Ferry, Motorway, ..
from general folder: – Poi’s, – waypoints, – shapingpoints, – tracks, – routes

>> Tour 2
>>> General Folder (to link by Day)
– poi “home”
– poi “best coffee”
– poi “best burger”
– poi “hotel1”
– poi “camping1”
– poi “Gasstation1”
– Track 1 “nice Gravelroad”
– Route 1 “nice curvy Road”

>>> Day 1 #Arrival #dateconfig
>>>> Section 1 – Section preset: Roadfun, Ferry no, Motorway yes
– wpt 1 (start point, poi “home”)
– wpt y (shaping point/-s)
– wpt 2 (waypoint, poi “best coffee”)
– wpt y (shaping point/-s)
– wpt z (endpoint, poi “hotel1”)

>>> Day 2 #Approach > nice Gravelroad > nice curvy Road > Departure #dateconfig
>>>> Section 1 – Section preset: Roadfun, Ferry no, Motorway no
– wpt 1 (start point, “my position”) – wpt y (shaping point/-s)
– wpt 2 (waypoint, poi “Gasstation1”) – wpt y (shaping point/-s)
– wpt z (endpoint, startpoint Track 1)

>>>> Section 2 – Section -Preset: unpaved roads, Ferry no, Motorway no
– trk 1 (first trackpoint from imported Track1)
– trk x (last trackpoint from imported Track1)

>>>> Section 3 – Section preset: Roadfun, Ferry no, Motorway no
– rte 1 (first routepoint from imported Route1)
– rte x (last routepoint from imported Route1)

>>>> Section 4 – Section preset: Roadfun, Ferry no, Motorway no
– wpt 1 (start point, “my position” or “last point”)
– wpt y (shaping point/-s) – wpt 2 (waypoint, poi “best burger”)
– wpt y (shaping point/-s) – wpt z (endpoint, poi “camping1”)

>>> Day x >>>> Section 1
>>>> Section x

• This topic was modified 2 months, 1 week ago by far-rider. Reason: linebreak
• This topic was modified 2 months, 1 week ago by far-rider. Reason: linbreak, readability

[far-rider]

i forgot:

There shout be an option, to auto or manual switch from one section to the next.

Also needs a Manager like this one a great usability, may be for change Presets, Points, order of Points/sections/days,…

 

… is there any chance for an tool like this?

 

[Author]

Posts